Introduction
This page is dedicated to information that will assist the modeller in uses for the KRM HO 010 Expanded Mesh
The see through mesh which is available from the products page is a photo etched product measuring 180mm x 45mm. As with all photo etched parts, be very careful when handling them, and always read through the instructions a few times before working with any new kit.
Uses for Expaned Mesh
There are many a varied uses for this type of expanded mesh, which are listed below.
Shunters steps.(Refer to photo at left)
Walkways on top of hoppers and other vehicles.
Walkways on and next to bridges for workman's access.
Steps at the rear of panel vans and utility vehicles.
Hatches and drainage covers.
Bridge saftey walkways.
If you have any other ideas, please let me know by email and they can be posted here for others to try
